Short Communication
Key words: A.J. Wilcock wire; retention; splint.
Year : 2017 | Volume : 8 | Issue : 1 | Page : 38-39
Fibre glass splint retainer with tongue-thrusting spikes
Shrikant Shrinivas Chitko1, Udita Hasmukh Mehta1, Neeraj Suresh Patil1, Veerendra V Kerudi1, Harshal Ashok Patil2
1 Department of Orthodontics, ACPM Dental College, Dhule, Maharashtra, India, 2 Private Orthodontic Practice, Jalgaon, Maharashtra, India
Correspondence Address:
Harshal Ashok Patil
Private Orthodontic Practice, Jalgaon, Maharashtra, India.
Abstract:
Tongue-thrusting is one of the most common habits seen in orthodontics. Complete elimination of the habit to prevent relapse is one of the challenges. Correction of tongue-thrusting habit is quite difficult, more so if the habit is ingrained. Here, we are introducing a retainer made of fiber glass with spikes for tongue-thrusting habit control incorporated in it.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/2349-5243.200220
How to cite this article: Patel P, Shanthraj R, Garg N, Vallakati A. Skeletal Class II division 1 malocclusion treated with twin-block appliance. Int J Orthod Rehabil 2017;8:31-7.
Case Report
Key words: Class I; Class II; overbite; overjet; twin‐block appliance; two‐phase therapy.
Year : 2017 | Volume : 8 | Issue : 1 | Page : 31-37
Skeletal Class II division 1 malocclusion treated with twin-block appliance
Pratik Patel, Ravi Shanthraj, Nekta Garg, Anisha Vallakati
Department of Orthodontics, JSS Dental College and Hospital, JSS University, Mysore, Karnataka, India
Correspondence Address:
Pratik Patel
Department of Orthodontics, JSS Dental College and Hospital, JSS University, Mysore, Karnataka, India.
Abstract:
A 10-year-old female presented with a skeletal Class II relation with 7 mm of overjet, 40% overbite, and bilateral posterior lingual crossbite. Two-phase therapy was planned to correct Class II skeletal relation, overjet, overbite, and to achieve lip competency. Phase I therapy was done with twin-block appliance to advance the retrognathic mandible. Phase II therapy was accomplished with fixed appliance for arch coordination to correct minor displacement and to finalize occlusion. Posttreatment, skeletal Class I relation was achieved. Incisors' inclination was improved, and ideal overjet and overbite with bilateral class I molar relationship was achieved. As the mandible advanced, lip competency, facial convexity, and mentolabial sulcus improved.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/2349-5243.200217
How to cite this article: Patel P, Shanthraj R, Garg N, Vallakati A. Skeletal Class II division 1 malocclusion treated with twin-block appliance. Int J Orthod Rehabil 2017;8:31-7.
Review Article
Year : 2017 | Volume : 8 | Issue : 1 | Page : 26-30
Acupressure therapy in orthodontics: A review
Abhimanyu Rohmetra, Ragni Tandon, Kamlesh Singh, Ankita Jaiswal
Department of Orthodontics and Dentofacial Orthopedics, Saraswati Dental College, Lucknow, Uttar Pradesh, India
Correspondence Address:
Abhimanyu Rohmetra
Room No 6, Boys Hostel, Saraswati Dental College, Lucknow, Uttar Pradesh, India.
Abstract:
Acupressure (acupuncture + pressure) is an alternative medicine technique derived from acupuncture. Here, physical pressure is applied to acupuncture points by the elbow, hand, or with various devices. There are literally thousands of acupressure points on the body. Many of the problems encountered in dental clinics can be curbed using these pressure techniques very easily and it is not an invasive process like acupuncture. The article provides a review of pressure techniques and its use (focusing on gaging, dental anxiety, and temporomandibular joint pain) in orthodontic as well as any other dental setup.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/2349-5243.200222
How to cite this article: Rohmetra A, Tandon R, Singh K, Jaiswal A. Acupressure therapy in orthodontics: A review. Int J Orthod Rehabil 2017;8:26-30.
Original Article
Key words: Orthodontics; postgraduate students; stress.
Year : 2017 | Volume : 8 | Issue : 1 | Page : 19-25
Evaluation of psychological stress in orthodontic PG students in India
A Chacko, T Tikku, K Srivastava
Department of Orthodontics, Babu Banarasi Das College of Dental Sciences, Lucknow, Uttar Pradesh, India
Correspondence Address:
K Srivastava
Department of Orthodontics, Babu Banarasi Das College of Dental Sciences, Lucknow, Uttar Pradesh, India.
Abstract:
Introduction:
Psychological stress is associated with many professions including dental surgery and is commonly encountered among BDS students, which later increases during post graduation (MDS). In this study we intended to identify the perceived sources and the extent of the psychological stress in the Orthodontic post-graduate students, and also evaluate the influence of different variables on overall stress and the effect of various stress relievers among the PG students.
Material and Method:
A questionnaire type of survey was conducted among 80 Orthodontic post graduate students (39 male and 41 female). A total of 22 factors were shortlisted for the questionnaire and were grouped under three broad categories as Personal, Curriculum Factors and Clinical Factors which were scored on a four point scale as 0- Not applicable, 1- Mild stress, 2–Moderate stress, 3–Severe stress.
Result:
The result showed that the majority of the PGs were definitely stressed, with females being more stressed than males, though the difference between two genders was statistically non-significant for most of the perceived sources of stress except for home sickness . In overall stress scores for different variables, the difference was statistically non-significant in all of them. Among the stress busters use of social media, alcohol and smoking were significantly associated with some of the student characteristics.
Conclusion:
The stress levels in PG curriculum definitely exist and the students should adopt proper stress busters to relieve the stress so as to work efficiently during their course.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/2349-5243.200218
How to cite this article: Chacko A, Tikku T, Srivastava K. Evaluation of psychological stress in orthodontic PG students in India. Int J Orthod Rehabil 2017;8:19-25.
Original Article
Key words: Dehiscence; dentopapillary complex; gingival biotype.
Year : 2017 | Volume : 8 | Issue : 1 | Page : 11-18
Gingival biotype and its relation to incisors' inclination and dentopapillary complex: An in vivo study
Nekta Garg1, A Bhagyalakshmi1, N Raghunath1, BM Shivalinga1, BS Avinash2
1 Department of Orthodontics, JSS Dental College, Mysore, Karnataka, India, 2 Department of Periodontology, JSS Dental College, Mysore, Karnataka, India
Correspondence Address:
Nekta Garg
Department of Orthodontics, JSS Dental College and Hospital, JSS University, Mysore, Karnataka, India.
Abstract:
Objectives:
To study the gingival biotype and its relation to maxillary and mandibular incisor inclination and its relation to dentopapillary complex.
Materials and Methods:
This cross-sectional study included 150 consecutive patients seeking orthodontic treatment at JSS Dental College, Mysore. Gingival biotype was assessed for maxillary and mandibular incisors using a digital vernier caliper. Maxillary and mandibular incisors' inclination and position were measured using cephalometric analysis. Parameters of dentopapillary complex were recorded from the dental casts.
Results:
The prevalence of thin gingival biotype was 42.66% for maxillary and 39.33% for mandibular incisors. A significant association was found between mandibular incisor inclination and thin gingival biotype, whereas there was no association between maxillary incisor inclination and gingival biotype. There was a significant correlation between gingival biotype and crown length, area of papilla, area of crown, and papilla length with P = 0.001 each.
Conclusion:
Mandibular incisor proclination is associated with thin gingival biotype, whereas no association is found in the maxilla. The correlation between gingival biotypes and dentopapillary complex is confirmed in this study. Evaluation of gingival biotype is of paramount importance during treatment planning for orthodontic patients.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/2349-5243.200219
How to cite this article: Garg N, Bhagyalakshmi A, Raghunath N, Shivalinga BM, Avinash BS. Gingival biotype and its relation to incisors’ inclination and dentopapillary complex: An in vivo study. Int J Orthod Rehabil 2017;8:11-8.
Original Article
Key words: Aesthetic component; dental health component; index of orthodontic treatment need.
Year : 2017 | Volume : 8 | Issue : 1 | Page : 5-10
Evaluation of reliability of index of orthodontic treatment need for assessment of orthodontic treatment need
N Singh, D Bagga, R Sharma, R Singh
Department of Orthodontics and Dentofacial Orthopedics, Maulana Azad Institute of Dental Sciences, New Delhi, India
Correspondence Address:
N Singh
Department of Orthodontics and Dentofacial Orthopedics, Maulana Azad Institute of Dental Sciences, New Delhi - 110 002, India.
Objective:
The aim of this study was to evaluate the reliability of index of orthodontic treatment need (IOTN) for assessment of orthodontic treatment need.
Materials and Methods:
A total of 106 subjects of aged between 18 and 25 years with no history of orthodontic treatment were selected by the convenience sampling method from the nondental student population of institutions belonging to North Indian population. The expressed demand for orthodontic treatment by the subjects was assessed using questionnaire. The self-perception of the subjects about orthodontic treatment need was done using aesthetic component (AC) of IOTN. The need for orthodontic treatment was evaluated by the investigator using AC and dental health component (DHC) of IOTN and by a panel of orthodontists using subjective assessment of the patient's study models.
Results:
Orthodontic treatment need to be determined by the investigator using DHC of IOTN moderately correlated with the demand of orthodontic treatment by the subjects as assessed using subjects response to questionnaires (ρ = 0.627) and orthodontic treatment need to be determined by the opinion of the panel of orthodontists (ρ = 0.598).
Conclusion:
DHC of IOTN was found to be reliable for evaluating orthodontic treatment need.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/2349-5243.200224
How to cite this article: Singh N, Bagga D, Sharma R, Singh R. Evaluation of reliability of index of orthodontic treatment need for assessment of orthodontic treatment need. Int J Orthod Rehabil 2017;8:5-10.
Case Report
Keywords: Biomechanics, intrusion, segmental mechanics, three‐piece base arch
Year : 2017 | Volume : 8 | Issue : 2 | Page : 81-89
A modified three-piece base arch for en masse retraction and intrusion in a Class II Division 1 subdivision case
Dhaval Ranjitbhai Lekhadia, Gautham Hegde, K Sindhuja
Department of Orthodontics, AJIDS, Mangalore, Karnataka, India
Correspondence Address:
Dhaval Ranjitbhai Lekhadia
Department of Orthodontics, AJIDS, Mangalore, Karnataka, India.
Abstract:
This case report describes the orthodontic treatment of an 18-year-old male patient who presented with the prognathic maxilla, deep bite, low mandibular plane angle, and proclined incisors. Modified three-piece base arch was used for the intrusion and retraction of maxillary incisor. En masse retraction was achieved in 6 months. Reduced time for retraction was attributed to a single stage of retraction, unlike burrstone three-piece intrusion base arch where canines are individually retracted followed by retraction of incisors. A modified utility arch was used in lower arch followed by a continuous archwire technique. The case was finished using bite settling elastics on a continuous archwire. The step between canine and premolar was corrected in the finishing phase of treatment. The final treatment outcomes were satisfactory, and true intrusion was achieved with proper selection of biomechanics.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_6_17
How to cite this article: Lekhadia DR, Hegde G, Sindhuja K. A modified three-piece base arch for en masse retraction and intrusion in a Class II Division 1 subdivision case. Int J Orthod Rehabil 2017;8:81-9.
Case Report
Keywords: Interdisciplinary approach, orthodontic tooth movement, periodontal therapy
Year : 2017 | Volume : 8 | Issue : 2 | Page : 78-80
Orthodontic management of a periodontally compromised patient
Madhukar Reddy Rachala, Kaladhar Reddy Aileni, Pitalla Naveen Kumar, Donthula Soujanya, Chinthakunta Reddy Prathima
Department of Orthodontics, SVS Institute of Dental Sciences, Mahabubnagar, Telangana, India
Correspondence Address:
Donthula Soujanya
Department of Orthodontics, SVS Institute of Dental Sciences, Mahabubnagar, Telangana, India.
Abstract:
Today many adult patients with periodontal disease demonstrate malocclusions that compromise their esthetics and ability to maintain oral hygiene. With adequate combined orthodontic.periodontal treatment it is possible to correct malocclusion and re.establish a healthy and well-functioning dentition. However, while orthodontic treatment can realign periodontally affected teeth, esthetic appearance may be compromised by gingival recession due to alveolar bone dehiscences or fenestrations in combination with a thin gingival biotype. This article reports an interdisciplinary. (orthodontic and periodontic) approach for the treatment of a periodontally compromised patient with spacing in anterior dental region. Periodontal therapy, including periodontal plastic surgery to obtain root coverage as well as orthodontic treatment by means of a fixed appliance was used to achieve stable periodontal conditions and successful esthetic and functional final results.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_34_16
How to cite this article: Rachala MR, Aileni KR, Kumar PN, Soujanya D, Prathima CR. Orthodontic management of a periodontally compromised patient. Int J Orthod Rehabil 2017;8:78-80.
Case Report
Year : 2017 | Volume : 8 | Issue : 2 | Page : 74-77
Eagle syndrome: Orthodontist's perspective
K Sindhuja, Gautham Hegde, Rohan Rai, Abhinay Sorake, Naveen Suvarna
Department of Orthodontics and Dentofacial Orthopaedics, A.J. Institute of Dental Sciences, NH-17, Kuntikana, Mangalore, Karnataka, India
Correspondence Address:
K Sindhuja
Department of Orthodontics and Dentofacial Orthopaedics, A.J. Institute of Dental Sciences, NH-17, Kuntikana, Mangalore - 575 004, Karnataka, India.
Abstract:
The objective of the article is to report a case of Eagle syndrome in an orthodontic patient. A 20-year-old patient reported to the Department of Orthodontics with a chief complaint of crowding in upper and lower teeth and difficulty in mouth opening. Detailed history and radiographs led to the diagnosis of elongated styloid process also termed as “Eagle syndrome.”
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_35_16
How to cite this article: Sindhuja K, Hegde G, Rai R, Sorake A, Suvarna N. Eagle syndrome: Orthodontist's perspective. Int J Orthod Rehabil 2017;8:74-7.
Review Article
Year : 2017 | Volume : 8 | Issue : 2 | Page : 67-73
Cone beam computed tomography: A newer avenue in orthodontic diagnosis and treatment planning
N Tilekar1, VD Swami2, AV Sabane2, SA Shinde3, RB Sable1
1 Department of Orthodontics and Dentofacial Orthopedics, Bharati Vidyapeeth University Dental College and Hospital, Pune, Maharashtra, India, 2 Department of Orthodontics, Bharati Vidyapeeth Deemed University Dental College and Hospital, Pune, Maharashtra, India, 3 Department of Orthodontics and Dentofacial Orthopedics, Bharati Vidyapeeth Deemed University Dental College and Hospital, Pune, Maharashtra, India
Correspondence Address:
N Tilekar
2/A-11/28, New Ajanta Avenue Society, Kothrud, Pune - 411 038, Maharashtra, India.
Abstract:
Cone beam computed tomography (CBCT)-three-dimensional (3D) imaging technique has shown tremendous progress since its introduction in dentistry and reformed the efficiency and effectiveness of orthodontic care. There has been a great revolution from its use as a predominantly diagnostic tool to an imaging method now used for predicting treatment outcomes and planning treatment. The conventional imaging techniques are basically two-dimensional (2D) representations of 3D objects and hence, they have many limitations. Malocclusion results from discrepancies in three planes of space and hence, 2D imaging cannot be used to achieve ideal imaging goals in orthodontics. It is an excellent tool for diagnosis, treatment planning, patient management and education, improved treatment outcome, and patient satisfaction. A cone beam examination is recommended in the detection of assessing shape and growth of mandible, localization of impacted canines, evaluation of root resorption repair, for the placement of temporary anchorage device, airway analysis in growing patients with maxillary constriction treated with rapid palatal expansion, etc, This article provides a comprehensive and current review of key studies on the applications of CBCT in orthodontic diagnosis and treatment planning.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_8_17
How to cite this article: Tilekar N, Swami VD, Sabane AV, Shinde SA, Sable RB. Cone beam computed tomography: A newer avenue in orthodontic diagnosis and treatment planning. Int J Orthod Rehabil 2017;8:67-73.
Review Article
Year : 2017 | Volume : 8 | Issue : 2 | Page : 60-66
Biochemical markers as skeletal maturity indicators
T Tripathi, P Gupta, P Rai
Department of Orthodontics and Dentofacial Orthopaedics, Maulana Azad Institute of Dental Sciences, New Delhi, India
Correspondence Address:
T Tripathi
Department of Orthodontics and Dentofacial Orthopaedics, Maulana Azad Institute of Dental Sciences, MAMC Complex, Bahadur Shah Zafar Marg, New Delhi - 110 002, India.
Abstract:
Precise estimation of the stage of skeletal growth is essential for the formulation of accurate treatment planning and employing orthodontic intervention through functional orthopedic appliances for the shortest time possible yielding stable results. Along with clinical and radiological techniques, biochemical markers play an important role in the growth assessment for differential treatment application. Isolation and characterization of various systemic and local factors having a significant role in the growth process provided us the sight to tap their potential to be used as skeletal maturity indicators. Different methods for the assessment of biomarkers in use are enzyme-linked immunosorbent assay, radioimmunoassays, and immunoradiometric assays. These methods of assessment of biochemical markers are noninvasive and when interpreted correctly give useful information. This article presents an overview of various biomarkers under research for predicting skeletal growth.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_37_16
How to cite this article: Tripathi T, Gupta P, Rai P. Biochemical markers as skeletal maturity indicators. Int J Orthod Rehabil 2017;8:60-6.
Review Article
Year : 2017 | Volume : 8 | Issue : 2 | Page : 57-59
“I don't look good” unexplored parameter of orthodontic treatment
Ankita Jaiswal, Ragni Tandon, Kamlesh Singh, Abhimanyu Rohmetra
Department of Orthodontics and Dentofacial Orthopaedics, Saraswati Dental College, Lucknow, Uttar Pradesh, India
Abstract:
Body image plays a significant role for patients seeking orthodontic treatment. But sometimes, some patients are preoccupied with a perceived defect in his or her physical features (body image) and are excessively concerned about it. They focus on physical defects that are unnoticeable by others and are suffering from a psychological (somatoform) disorder known as body dysmorphic disorder (BDD). Therefore, aware of the condition by orthodontists is essential as these are cases either with no deformity or is a most unsatisfied group. This article focuses on the identification of BDD, its etiology, symptoms, role in orthodontics and management.
Correspondence Address:
Abhimanyu Rohmetra
Department of Orthodontics and Dentofacial Orthopaedics, Saraswati Dental College, Lucknow, Uttar Pradesh, India.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_40_16
How to cite this article: Jaiswal A, Tandon R, Singh K, Rohmetra A. “I don't look good” unexplored parameter of orthodontic treatment. Int J Orthod Rehabil 2017;8:57-9.
Original Article
Year : 2017 | Volume : 8 | Issue : 2 | Page : 51-56
Comparison of soft tissue chin thickness in adult patients with various mandibular divergence patterns in Kodava population
ABSTRACT
Background:
Finally, facial contours are determined by the soft tissues, and these can be altered by growth and orthodontic treatment. The position and the relationships among the facial structures can be affected by variation in thickness, length, and tonicity of soft tissues thereby affecting facial esthetics. Such variations between skeletal and soft tissues can cause a disassociation between the position of the underlying bony structures and the facial appearance that may shift treatment into the range of orthognathic and cosmetic surgery.
Aims:
This study was conducted to enumerate and compare soft tissue chin (STC) thickness in adult patients with various mandibular divergence pattern in Kodava population and to find the difference in STC thickness between men and women.
Materials and Methods:
A sample including eighty patients were stratified into four groups based on the divergence pattern defined by the mandibular plane (MP) to cranial base angle (MP/sella‐nasion [SN]; average = 32° ± 5°). Low (L) = MP/SN ≤27°; medium‐low (ML) = 27°<MP/SN ≤32°; medium‐high (MH) = 32° <MP/SN <37°; and high (H), MP/SN ≥37°. The STC thickness was measured at three different levels: Pogonion (Pog)‐Pog’, gnathion (Gn)‐Gn’, menton (Me)‐Me’. For statistical analysis Student’s t‐test, ANOVA were performed.
Results:
The STC thickness at Pog‐Pog’ and Me‐Me’ was the highest in ML followed by MH, low and was least in high. At Me‐Me’, the STC thickness was the highest in ML followed by low, MH and was least in high.
Conclusions:
STC thickness was greater in men than in women in all the groups except high mandibular divergence pattern.
Keywords: Hyperdivergent, Kodava, soft tissue chin thickness
Financial support and sponsorship
Nil.
Conflicts of interest
There are no conflicts of interest.
DOI:
10.4103/ijor.ijor_38_16
How to cite this article: Somaiah S, Khan MU, Muddaiah S, Shetty B, Reddy G, Siddegowda R. Comparison of soft tissue chin thickness in adult patients with various mandibular divergence patterns in Kodava population. Int J Orthod Rehabil 2017;8:51-6.
Original Article
Year : 2017 | Volume : 8 | Issue : 2 | Page : 41-50
Cephalometric and computed tomography evaluation of dentoalveolar/soft-tissue change and alteration in condyle-glenoid fossa relationship using the PowerScope: A new fixed functional appliance for Class II correction –A clinical study
B Nishanth, Adusumilli Gopinath, Sameer Ahmed, Neelakantha Patil, K Srinivas, ASK Chaitanya
Department of Orthodontics and Dentofacial Orthopedics, AME's Dental College and Hospital, Raichur, Karnataka, India
Correspondence Address:
B Nishanth
Post Graduate Student, Department of Orthodontics and Dentofacial Orthopedics, AME’s Dental College and Hospital, Raichur, Karnataka, India.
Abstract:
Background and Objectives:
Among various interarch appliances for the correction of Class II malocclusion, PowerScope is one of the latest appliances used in the clinical practice of orthodontics. This clinical study was conducted to evaluate the clinical efficiency of PowerScope appliance by assessing skeletal, dentoalveolar, and soft-tissue changes and condyle-glenoid fossa relationship after using the appliance. The null hypothesis of this research is that there is a significant difference between dentoalveolar and soft-tissue changes alone.
Methodology:
Ten patients of age between 11 and 16 years, 4 males and 6 females, who reported to the Department of Orthodontics and Dentofacial Orthopedics, have been treated for Class II malocclusion (nonextraction) were selected for the study. Inclusion criteria included convex profile, retrognathic/deficient mandible, growing patient at least pubertal growth period, minimal crowding, and positive visual treatment objective. Exclusion criteria included patients with neuromuscular disease, temporomandibular joint problem, and skeletal open bite.
Statistical Analysis:
Statistical analysis is performed using Wilcoxon signed-rank test.
Results:
The study revealed the following findings. There are statistically significant changes in dentoalveolar and soft-tissue parameters after using PowerScope appliance. Statistical significant changes are seen in the anterior and posterior joint spaces relationship after using PowerScope appliance.
Interpretation and Conclusion:
Thus, PowerScope was clinically efficient in the correction of Class II malocclusion in noncompliant patients. Although there were changes in the skeletal parameters, they are not statistically significant. Hence, based on this clinical study, we can conclude that the Class II correction with PowerScope occurred almost entirely by dentoalveolar movement.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_5_17
How to cite this article: Nishanth B, Gopinath A, Ahmed S, Patil N, SrinivasK, Chaitanya A. Cephalometric and computed tomography evaluation of dentoalveolar/soft-tissue change and alteration in condyle-glenoid fossa relationship using the PowerScope: A new fixed functional appliance for Class II correction –A clinical study. Int J Orthod Rehabil 2017;8:41-50.
Clinical Innovation
Year : 2017 | Volume : 8 | Issue : 3 | Page : 125-127
A simple and effective appliance for correction of bilateral molar scissor bite: “The M-shaped palatal arch”
Romina Mahomadali Kapadia
Department of Orthodontics and Dentofacial Orthopaedics, K. M. Shah Dental College and Hospital, Sumandeep Vidyapeeth, Vadodara, Gujarat, India
Correspondence Address:
Romina Mahomadali Kapadia
Department of Orthodontics and Dentofacial Orthopaedics, K. M. Shah Dental College and Hospital, Sumandeep Vidyapeeth, At and Po Pipariya, Taluka Waghodia, Vadodara - 391 760, Gujarat, India.
Abstract:
Molar scissor-bite is a common finding in orthodontics. Many times, it is found as a sole malocclusion in a patient. Alignment of such buccally erupted molars is a challenging task. This article describes an innovative appliance, “the M-shaped palatal arch” for successful correction of bilateral molar scissor-bite.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_16_17
How to cite this article: Kapadia RM. A simple and effective appliance for correction of bilateral molar scissor bite: “The M-shaped palatal arch”. Int J Orthod Rehabil 2017;8:125-7.
Short Communication
Year : 2017 | Volume : 8 | Issue : 3 | Page : 123-124
Complementary use of essix retainer
Suresh K Kangane, Yatishkumar S Joshi, Ganesh Omraj Dange
Department of Orthodontics, MIDSR Dental College, Latur, Maharashtra, India
Correspondence Address:
Ganesh Omraj Dange
Department of Orthodontics, MIDSR Dental College, Vishwanathpuram, Ambajogai Road, Latur, Maharashtra, India.
Abstract:
Trauma leading to fracture of maxillary anteriors is a common finding in orthodontic patients with proclined upper anteriors. Retention is an integral part of orthodontic treatment. We hereby intend to provide a small modification in fabrication of the clear retainer which facilitates in the restoration of the fractured anterior tooth. Working models are made for maxillary and mandibular arches. Fracture tooth is buildup on the working model using acrylic to replicate the anatomy of the tooth. Thermoformed retainer is fabricated on these working models with built-up fractured. These can be used as a retainer followed by restoration. The thermoplastic retainer can be used as template for restoration of the fractured anterior tooth saving clinical time for buildup of teeth and reduces an appointment of the patient.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_2_17
How to cite this article: Kangane SK, Joshi YS, Dange GO. Complementary use of essix retainer. Int J Orthod Rehabil 2017;8:123-4.
Case Report
Year : 2017 | Volume : 8 | Issue : 3 | Page : 119-122
Nasoalveolar molding for the rehabilitation of newborns with cleft
Neha, Tulika Tripathi, Priyank Rai
Department of Orthodontics and Dentofacial Orthopedics, Maulana Azad Institute of Dental Sciences, New Delhi, India
Correspondence Address:
Neha
Department of Orthodontics and Dentofacial Orthopedics, Maulana Azad Institute of Dental Sciences, New Delhi - 110 002, India.
Abstract:
The success of repair in cleft lip and palate depends on the extent of disfigurement and the size of disfigurement which guides the surgical repair. With the popularization of nasoalveolar molding (NAM), the results of primary surgery in such patients have greatly improved due to the presurgical correction of the deformities leading to a better approximation of the tissues and hence reduced scarring. Thus, today, the knowledge of pre-surgical nasoalveolar molding should be a part of any orthodontist's armamentarium to enhance the results of surgical lip repair and reduce the extent of nasal deformity minimizing the need for revision surgeries. The current report describes the use of NAM in a newborn with unilateral cleft lip and palate and demonstrates the excellent results thus achieved after surgical repair.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_19_17
How to cite this article: Neha, Tripathi T, Rai P. Nasoalveolar molding for the rehabilitation of newborns with cleft. Int J Orthod Rehabil 2017;8:119-22.
Case Report
Year : 2017 | Volume : 8 | Issue : 3 | Page : 112-118
Surgical management of Class III malocclusion: A 1 year follow-up
Suresh K Kangane1, Yatishkumar Joshi1, Khushbu D Agrawal1, Rahul Laturiya2, Sheeraz Badal2
1 Department of Orthodontics, MIDSR Dental College, Latur, Maharashtra, India, 2 Department of Oral and Maxillofacial Surgery, MIDSR Dental College, Latur, Maharashtra, India
Correspondence Address:
Khushbu D Agrawal
Department of Orthodontics, MIDSR Dental College, Vishwanathpuram, Ambejogai Road, Latur, Maharashtra, India.
Abstract:
For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment option left. One indication for surgery is a malocclusion too severe for orthodontics alone. It is possible now to be at least semiquantitative about the limits of orthodontic treatment in the context of producing normal occlusion as the diagrams of the “envelope of discrepancy” indicate. In this case report, we have presented orthognathic treatment plan of an adult male patient with skeletal Class III malocclusion and anterior crossbite. Patient's malocclusion was decompensated by orthodontic treatment just before the surgery and then normal jaw relationship achieved by bilateral sagittal split ramus osteotomy. Patient's dental and facial profile was improved in a total of 18 months treatment duration. One-year follow-up showed stable results.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_3_17
How to cite this article: Kangane SK, Joshi Y, Agrawal KD, Laturiya R, Badal S. Surgical management of Class III malocclusion: A 1 year follow-up. Int J Orthod Rehabil 2017;8:112-8.
Original Article
Year : 2017 | Volume : 8 | Issue : 3 | Page : 108-111
Assessment of skeletal and dental maturity indicators and comparison of maturity indicators in vertical and horizontal growth pattern individuals with normal growth pattern individuals
Amol Verulkar1, Pritesh Singla2, Harshal Ashok Patil3, Pawankumar Dnyandeo Tekale4
1 Department of Orthodontics, VYWS Dental College, Amravati, Maharashtra, India, 2 Department of Orthodontics and Dentofacial Orthopedics, AIDSR Dental College, Bathinda, Punjab, India, 3 Private Orthodontic Practice, Aditya Chambers, Housing Society, Jalgaon, Maharashtra, India, 4 Department of Orthodontics, Dr. Rajesh Ramdasji Kambe Dental College and Hospital, Akola, Maharashtra, India
Correspondence Address:
Harshal Ashok Patil
Private Orthodontic Practice, Aditya Chambers, Housing Society, Jalgaon - 425 001, Maharashtra, India
Abstract:
Objective:
The purpose of the present study was carried out to establish whether the vertical and horizontal growth patterns influence the rate of dental and skeletal maturation as compared to normal growth patterns.
Materials and Methods:
This study comprised sixty samples divided into three groups. Group I normal grower (control), Group II-vertical growers, and Group III-horizontal growers. Each sample was assessed for skeletal and dental age using cervical vertebrae maturation index (CVMI), skeletal maturity indicator stages and canine calcification stages, respectively. All data in the groups were analyzed by analysis of variance test. Subgroup data and comparisons were analyzed by Dunnett D-test and -test.
Results:
Results showed that dental maturation was delayed in horizontal growers as compared to vertical growers with = 0.00 and 0.044. There was nonsignificant difference in dental maturation of male and females with >0.05. The comparison of skeletal maturation by hand-wrist radiograph showed significant variation in Group III with delayed skeletal maturation of horizontal growers than control group with P < 0.05. Dunnett D-test showed main skeletal age by CVMI was significant with = 0.00 which indicates that skeletal age of Group III to be lower in all groups. Rest was nonsignificant.
Conclusion:
Individuals with horizontal growth pattern showed delayed dental maturation when compared to vertical growers.
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_20_17
How to cite this article: Verulkar A, Singla P, Patil HA, Tekale PD. Assessment of skeletal and dental maturity indicators and comparison of maturity indicators in vertical and horizontal growth pattern individuals with normal growth pattern individuals. Int J Orthod Rehabil 2017;8:108-11.
Original Article
Year : 2017 | Volume : 8 | Issue : 3 | Page : 96-100
Perception of smile attractiveness toward various forms of anterior diastemas among undergraduate dental and nondental students: A questionnaire-based study
Siham Arezki Houacine, Elhadi Mohieldin Awooda
Department of Conservative Dentistry, Faculty of Dentistry, University of Medical Sciences and Technology, Khartoum, Sudan
Correspondence Address:
Elhadi Mohieldin Awooda
Department of Conservative Dentistry, Faculty of Dentistry, University of Medical Sciences and Technology, P. O. Box 12810, Khartoum, Sudan
Abstract:
Background:
Smiling is the evident component of facial attractiveness. Midline diastema is considered in some cultures as unattractive and as a malocclusion, especially in Western countries while it is considered as a sign of beauty in Africa and Middle-East.
Aim:
The aim of this study is to compare the smile attractiveness perception of dental and nondental students toward anterior diastemas and to determine whether all spaces in the esthetic zone are considered unattractive as midline diastema.
Materials and Methods:
This is a descriptive cross-sectional study conducted among 156 dental and pharmacy students from the University of Medical Sciences and Technology, Sudan, from December 2015 to January 2016. A self-administered questionnaire was distributed to the participants and it consisted of two parts: part one – related to gender, faculty, educational level, and questions about dental diastema, and part two – containing four modified pictures of a young female's smile modified by photoediting software to create different spaces between anterior teeth (midline, Simian, Frush and Fisher, and Lombardi diastema). Participants were asked to rank the pictures according to attractiveness from the most to the least attractive using visual analog scale. Comparison between variables was made by Chi-square test with P < 0.05.
Results:
Smile attractiveness from the most to the least attractive was Simian > Frush and Fisher > midline > Lombardi among both dental and pharmacy students. Gender and presence of diastema had no relation with the student's perception (P > 0.05). There was a significant statistical difference between dental and pharmacy students regarding Frush and Fisher diastema (P = 0.034). Most of the students with diastema felt shy when smiling.
Conclusions:
The location and width of diastema had an important role on the attractiveness perception of dental diastemas. Midline diastema was not a gap with the most negative perception
Source of Support:
None
Conflict of Interest:
None
DOI: 10.4103/ijor.ijor_7_17
How to cite this article: Houacine SA, Awooda EM. Perception of smile attractiveness toward various forms of anterior diastemas among undergraduate dental and nondental students: A questionnaire-based study. Int J Orthod Rehabil 2017;8:96-100.